VIKING™ STANDARD INLET VALVE
The VIKING™ Standard Inlet Valve has a push button which is slightly higher than the housing. 360 degree swivel. Airflow 80 liters/min.
VIKING™ PUSH PROTECTED INLET VALVE
The VIKING™ Push Protected Inlet Valve has a push button slightly lower than the housing which helps prevent accidental inflation by equipment straps etc. 360 degree swivel. Airflow 80 liters/min.
This is the default inlet valve for PRO, PROTECH, HD, HAZTECH, XTREME, VSN & VTS drysuits.
VIKING™ HAZMAT INLET VALVE
The VIKING™ Hazmat Inlet Valve is developed specifically for contaminated water diving conditions, and is equipped with a slide valve which may be closed manually enabling the diver to shut off the airflow in an emergency. This avoids the need to disconnect the hose, and eliminates the possibility of contaminated water entering the valve. This in addition to the non return valve already inside the valve. 360 degree swivel. Airflow 80 liters/min.
Fitted as standard to HDS suits
VIKING™ LOW-ACOUSTIC INLET VALVE
The VIKING™ Low-Acoustic Inlet Valve is visually the same as the Hazmat inlet, but the slide performs a different function. Fully open the valve has an airflow of 80 liters/min, and in the "second" position, the airflow is reduced to only 20 liters/min, which creates a significantly lower acoustic profile. This valve is therefore intended for military use.
NON MAGNETIC VERSIONS OF ALL THE ABOVE VALVES AVAILABLE WHICH MEET THE REQUIREMENTS OF STANAG EOD OPERATIONS
VIKING™ APEKS INLET VALVE
The VIKING™ Apeks Inlet Valve is a push protected inlet valve with the button slightly below the housing to prevent accidental valve inflation. 350 degree valve rotation. Airflow -- liters/min.