VIKING™ PRO

Ansell's biggest selling drysuit worldwide. Designed for flexibility and comfort in a wide range of applications. Vulcanised seams allow for peace of mind when diving under all situations.
The VIKING™ PRO is easy to clean and repair which helps
to minimise downtime.

  • Designed for flexibility and comfort in a wide range of applications
  • External vulcanised seams allow for peace of mind under all diving situations
  • Internal stitched and taped seams
  • Easy to repair in the field, which helps to minimise downtime
  • Easy to clean exterior when contaminated

Translate

Find your reseller

Select region and country to find your local reseller.

Find Seller

VIKING™ PRO

design

Vulcanised dry diving suit with back-entry. Fitted with footwear, neck seal, cuffs and integrated suspenders.

suit material

Knitted polyester fabric coated on the outside with an NR/EPDM rubber blend, 1150 g/m2.  

SEAMS

Stitched seams sealed with a textile tape on the inside.
On the outside a rubber tape is vulcanised over the seam. 
Vulcanisation is a chemical bonding process, ensuring water-tight seams.

REINFORCEMENTS

Rubber reinforcements from the foot up over the knee and the seat, across shoulders and down over elbows and in the crotch. Reinforcements are vulcanised onto the suit.

COLOUR

Black with red reinforcements on shoulders/zipper, or all black.

Standards

  • EN 14225-2:2017
  • Optional requirements for biological protection (BIO)*

*Suits without valves

neck components

Standard: Surveyor latex neck seal, glued-on
Options: Neoprene neck seal, various models

HOOD OPTIONS

Surveyor latex hood
• Neoprene hood, various models
• Rubber hood, various models

collar options

Viking Quick Neck Collar, for mounting a neck seal and/or a hood.

Yoke options

Various models available to fit various helmet brands and designs.

wrist components

Standard: PRO latex cuffs, glued-on
Options: Other Latex cuff models or Neoprene cuffs, Rubber cuff ring or Bayonet ring system,
both of which allow for cuffs and/or gloves to be mounted.

FOOTWEAR

Standard: Integrated rubber soles, vulcanised to the suit. The sole features a non-slip surface
for grip, and the heel has a fin strap retainer.
Options: Latex socks, Neoprene boots or Nitrile rubber safety boots – all glued-on

ZIPPER

Black/Red suits: Heavy Duty (HD) magnetic; 90 cm long.
Black suits: Heavy Duty (HD) non-magnetic; 90 cm long.

The zipper is gas and water-tight, and is placed on the back across the shoulders.

INlet valve

Standard: Push protected inlet valve, placed in the centre of the chest.
Options: VIKING high button, HAZMAT, Apeks or non-magnetic versions.

exhaust VALVE

Standard: VIKING X2 exhaust valve, placed on the upper left sleeve.
Options: VIKING Low profile, Apeks or non-magnetic versions.

optional features

Relief zipper
Pockets, different designs
Reflective tape on sleeves and/or legs
Extension and/or shortening of legs and/or sleeves

INCLUDED WITH EACH DELIVERY

Each suit comes supplied as standard with:
Suspenders
Patch repair kit, including zip care fluid
Inflation hose, 75 cm long with CEJN fitting
Carry bag
Instructions for Use (IFU)

Coated Fabric

Property

Result

Standard

 Thickness

 1.20 mm +/- 0.10 mm

 

 Weight

 1050 gm/m2 +/- 100 g/m2

 ISO 3801

 Tensile Strength

 Warp: min 800 N / 50 mm

 Weft: min 650 N / 50 mm

 ISO 1421

 Tear Strength

 Warp: min 45 N

 Weft: min 45 N

 ISO 4674

 Puncture Resistance

 Min 60 N

 pr EN 863

 Abrasion Resistance

 Min 7000 rounds to rubber breakthrough

 ISO 5470-1 H18, 250 g

 

HZ Test Results Table (VikinG™ PRO does not meet HZ requirements due to failure of Liquid B test) 

CHEMICAL PERMEATION BT TIME (MIN)  PROTECTION INDEX
SULPHURIC ACID, H2S04 (aqueous) MATERIAL   > 480 HIGH
  SEAM  > 480 HIGH
  ZIPPER  > 480 HIGH
SODIUM HYDROXIDE, NaOH, 50% (aqueous) MATERIAL   > 480 HIGH
  SEAM  > 480 HIGH
  ZIPPER  > 480 HIGH
ISOPROPANOL MATERIAL  > 480 HIGH
  SEAM  > 480 HIGH
  ZIPPER  > 480 HIGH
TOLUENE, 0.05% (aqueous) MATERIAL  > 480 HIGH
  SEAM  > 480 HIGH
  ZIPPER  > 480 HIGH
LIQUID B  MATERIAL  20 FAIL
(70% ISO-OCTANE & 30% TOLUENE) SEAM  19 FAIL
  ZIPPER  48 FAIL
LIQUID F  MATERIAL  213 HIGH
(80% PARAFFIN OIL & 20% METHYLNAPTHALENE) SEAM  117 HIGH
  ZIPPER  > 480 HIGH

 

Minimum breakthrough time required: 20 minutes
Low protection Index: 20 - 60 minutes  
High protection Index:  > 60 minutes  

product data sheet (pds)

PDS VIKING™ PRO

 

SIZE CHART

VIKING™ PRO Size Chart

 

CERTIFICATE

VIKING™ PRO Certificate (EN 14225-2:2017 + BIO micro organism approval)

 

eu declaration of conformity

Link to EU Declaration of Conformity

 

INSTRUCTIONS FOR USE (IFU)

Link to Manuals/IFUs

Accessories

Related Products

DOWNLOAD AND STAY UPDATED

We would love to get to know the users of our products better! We believe that by building the bridge to the people that use and buy our products we can be better at making and designing the products that is needed and required.

We simply ask you to fill out your name and e-mail prior to download. That’s all. Your privacy is important to us and we will not misuse your information. Thanks.

Download